Digitech Studio 400
The 400 is a black 2U multi-fx box, fairly shallow in depth. On first glance one is immediately put in mind of the Eventide H3000. However, this unit is about half the price of an H3000D/SX.
Read George Shilling's review
DPA 3541
When scouring the microphone cupboards of the commercial studios I use, I am always delighted to encounter Brüel & Kjær models, (now available under the DPA name). Frequently, these are Type 4006 omni-directional condensers, known for their bright, clear and true characteristics.
Read George Shilling's review
Drawmer Front End One MX60
In the high-end 'voice channel' market, one can easily forget that Drawmer were an early entrant with the Vacuum Tube 1960. They now enter the crowded budget end of this market with the feature packed 'Front End One' MX60.
Read George Shilling's review
E.A.R. / Yoshino 660
Esoteric [es–o–ter'ik], adjective inner; secret; mysterious; taught to a select few – This is the dictionary definition of the ‘E.’ of E.A.R. (Esoteric Audio Research), which says much about the philosophy behind the company and its designs.
Read George Shilling's review
Eventide DSP 4500
The Eventide name is synonymous with the studio harmonizer. Their more recent designs include many other types of effects, but the pitch-shifter remains central to all 'Ultra-Harmonizer' models. The most widely known Eventide unit is the H3000 and its variants.
Read George Shilling's review
Fat Man 'Fat One' by TL Audio
I was just a few days into my health diet when the Fat One arrived, threatening to spoil things.
Read George Shilling's review
Inward Connections Vac Rac TEQ-1
The Vac Rac was originally reviewed by Dave Foister in the March 1996 edition of Studio Sound. This revisit is to evaluate the new EQ module, but first, a quick recap..
Read George Shilling's review
Joemeek MeekBox VC6
Since the introduction of the Joemeek Compressor a few years ago, Joemeek have been steadily increasing their range. They have found a particular niche with the all-in-one type of processor for use mostly as a direct-to-tape microphone processor.
Read George Shilling's review
Joemeek MeekBox VC2
I have long been a fan of Joe Meek's productions. I even went to a Joe Meek Appreciation Society event a few months back. But until recently I had not tried any of the famous JoeMeek range of outboard equipment, designed by Ted Fletcher.
Read George Shilling's review
LA Audio Classic Compressor
There are currently available many compressors and other outboard devices which use vacuum tubes and which have fairly hefty price tags. Some of these units have a limited range of useful features, and many lack the qualities of vintage valve designs.
Read George Shilling's review
LA Audio Millennium Series
Outboard equipment - "Toys" to use the technical term - I love them. Big ones, small ones, red ones, blue ones, (thank you, Dr.Seuss!), and especially ones with lots of colourful knobs on them, and big flashy displays.
Read George Shilling's review
Lexicon MPX1
Hot on the heels of Lexicon's mid-range multi-fx PCM80 came tc's reply: the M2000. This incorporated many of the PCM80's innovative features, along with the much vaunted Wizard feature, and a price lower than the Lexicon unit.
Read George Shilling's review
Lexicon PCM 90
Lexicon's top of the range 480L and its predecessor the 224X have for over ten years been held in the highest esteem. No high-end studio looks complete without the familiar LARC remote control on top of the mixer.
Read George Shilling's review
Mackie 1604-VLZ
Without doubt, Mackie mixers have empowered an army of musicians and DJs to record their efforts with greater control and flexibility than could ever be imagined ten years ago.
Read George Shilling's review
Manley Massive Passive
Manley have established a mighty reputation for their no-compromise outboard equipment. The attention to detail is astonishing, the manuals informative and entertaining, and the sound quality undeniably superb.
Read George Shilling's review
SPL Tube Vitalizer
The Tube Vitalizer looks impressive, with a nod towards vintage valve equipment. It is a 2U steel box, with a bare metal front panel. There are plenty of black knobs, and three grilles revealing glowing tubes.
Read George Shilling's review